Launch 2-Post Lifts The TLT240SBA at 4,000kg and the TLT250AT at 5,000kg. Two 2-post lifts, delivered and installed nationwide.
Built for real workshops. Electric locking, three-stage arms and a footprint that fits, from everyday servicing to larger SUVs, 4x4s and EVs.
TLT240SBA, one lift, delivered & installed nationwide*
Buying more than one? From £2,565 per lift.
- Nationwide delivery & installation
- 2-year warranty included
- Operator training provided
- CE load-tested for safety
A 2-post lift that earns its bay space
Both Launch lifts are built around the three things a busy workshop actually needs: safety it can rely on, controls that stay out of the way, and a footprint that fits.
Safe and reliable
Automatic safety locks, emergency lowering and CE-certified load testing keep the lift dependable shift after shift.
Easy and efficient
Electromagnetic unlocking, concealed wiring and flexible three-stage arms make it quick and intuitive to run all day.
Space-saving strength
A compact floorplate and low-profile arms handle a wide range of vehicles without swallowing your floor.
Two lifts. One workshop standard.
The everyday 4-tonne best-seller, or the 5-tonne clearfloor lift for SUVs, 4x4s and up to long wheelbase vans. Both lift EVs, and both come delivered, installed and backed by a 2-year warranty.
The right lift for what you work on
Each Launch lift is matched to a job. Pick the capacity that fits your bays and your busiest vehicles.
Everyday workshop lift
4,000kg capacity-
Cars
Symmetric & asymmetric pick-up
-
SUVs & 4x4
Short & long wheelbase
-
Car-derived vans
Compact and car-derived models
-
EVs
Battery and hybrid models
High-capacity lift
5,000kg capacity-
Larger SUVs & 4x4
Heavier and full-size models
-
Vans
Up to long wheelbase panel vans
-
EVs
Heavier EV platforms
The more you fit, the less you pay
Every price below is the delivered and installed price, with a 2-year warranty. No add-ons for delivery or fitting. The rate per lift drops when more go into the same workshop.
Buy 1 lift
Buy 2 lifts
Buy 3 or more
With an MOT bay
TLT240SBA, in detail
The Launch TLT240SBA-1 is a single phase 4,000kg floorplate two-post lift built for professional service bays. Its electric safety locking, double hydraulic cylinders and wire rope equalisation deliver synchronised lifting and controlled lowering, while concealed cable and hydraulic routing keeps the columns clean. Suitable for cars, SUVs, 4x4s and car-derived vans, including EVs, it provides consistent lifting performance for routine maintenance and repair.
- Capacity4,000 kg
- ConfigurationAsymmetric
- LockingElectric
- Front arms3-stage
What is included
Everything below comes as standard with the TLT240SBA.
- Suitable for cars, SUVs, 4x4s and car-derived vans, including EVs
- Double hydraulic cylinders for smooth lifting
- High-strength chain drive for stability
- Wire-rope equalisation keeps carriages in sync
- Automatic lock with electromagnetic release
- Emergency lowering on power failure
- Anti-explosion valves on the cylinders
- Travel limit switch prevents over-extension
- Three-stage telescopic front arms for flexible reach
- Powder-coated finish for long-term durability
2-year warranty
Parts and labour, backed by Liftmaster.
Training
Your team shown how to run it safely.
Delivery & install
Handled start to finish, no third parties.
Safe, Steady Daily Operation
Independent workshops face constant pressure to balance lifting performance with reliability and straightforward operation. Inconsistent carriage movement, exposed components and over-complex safety systems reduce efficiency and add risk in daily use. The TLT240SBA-1 addresses this by pairing a 4,000kg capacity with a compact floorplate design and concealed cable and hydraulic routing.
Stable vehicle positioning is critical for technician safety. The double hydraulic cylinders and wire rope equalisation system keep carriage movement synchronous, reducing the risk of vehicle tilt under load. Automatic safety unlocking, a 24V low-voltage control system and cylinder travel limit switches work together to support controlled, safe operation throughout the lift cycle.
For workshops that want a dependable two-post lift without added installation complexity or running cost, the TLT240SBA-1 is a practical long-term choice. Its CE-certified design, single-phase compatibility and balanced performance suit professional environments that put safety, reliability and everyday usability first.
TLT250AT, in detail
The Launch TLT250AT(C) is a 5,000kg clearfloor two-post lift built for workshops servicing heavier vehicles. Its symmetrical three-stage arms, double hydraulic cylinders and rope equalisation deliver balanced lifting and controlled lowering across the full range. Suitable for SUVs, 4x4s and up to long wheelbase vans, including EVs, it provides reliable under-vehicle access for routine servicing and repair.
- Capacity5,000 kg
- ConfigurationSymmetric
- Lifting height1,850 mm
- Drive-thru3,050 mm
Specification and features
A high-capacity lift for workshops handling bigger vehicles.
- 5,000kg capacity for SUVs, 4x4s and up to long wheelbase vans, including EVs
- Clearfloor overhead design for full access
- Symmetric 3-stage arms, 950 to 1,800mm reach
- Electro-hydraulic operation, electric locking
- Electromagnetic safety release for lowering
- Double hydraulic cylinders for level lifting
- Wire-rope equalisation keeps carriages in sync
- Cylinder travel limit switch as standard
- Single or three-phase electrics available
- CE-certified, 2-year warranty included
- Overall height4,810 mm
- Min ceiling≥5,010 mm
- Overall width4,110 mm
Built for Heavier Vehicle Workloads
Workshops are increasingly servicing heavier SUVs, vans and electrified platforms, putting added pressure on lifting equipment. Inconsistent lifting, limited height control and uneven load distribution affect efficiency and technician safety. The Launch TLT250AT(C) addresses this by combining a 5,000kg capacity with a clearfloor configuration that improves under-vehicle access and workflow.
Level lifting under load is critical when handling heavier vehicles. The double hydraulic cylinders and rope-controlled carriage equalisation keep both columns balanced, reducing the risk of tilt. An electromechanical height limitation system and safety valve protection support controlled performance and protect both the vehicle and the lift throughout the cycle.
For workshops servicing heavier categories without compromising safety or reliability, the TLT250AT(C) is a practical, future-ready choice. Its clearfloor layout, safety-focused design and availability in single or three-phase suit professional environments that prioritise technician safety, efficiency and dependable daily operation.
Ready for OEM and VAG-spec servicing
Lifting points and arm geometry suit manufacturer-spec servicing across common car, SUV and van platforms.
Brand names indicate platform suitability and are the property of their respective owners.
Bought, installed and supported in-house
From first enquiry to the final handover, Liftmaster handles the lot. No third-party installers, no passing you around. Just a lift that is fitted, tested and ready to work.
Talk to our sales teamInstalled nationwide
Delivered and fitted across the UK mainland.
Warranty backed
2 years parts and labour as standard.
Training provided
Your team shown safe operation.
CE load-tested
Certified before it lifts a wheel.
Enquire about your Launch lift
The price you see is the price delivered, installed and warranty-backed. Send a few details and the sales team will confirm availability and book your delivery and install.
